Heavy Duty Ladder Bendable Connector (Pairs) HDG
- Bendable connectors can be used for:
- A) fabricating fittings onsite from cut lengths of ladder.
- B) reducing width of a run to the next size down when a properly manufactured reducer is not available.
- C) correcting minor mis-alignment problems.
- D) coupling lengths of ladder to form articulated bends.
- Bendable couplers can be joined together for multiple configurations.
- Supplied in pairs with the appropriate quantity of fasteners. (4 per coupler)
- Manufactured from the same HDG steel as straight lengths for consistent strength and corrosion protection.
- Additional information
Additional information
| Product Type | Connector |
|---|---|
| Height | 115mm |
| Length | 250mm |
| Weight | 0.70 Kgs |
| Gauge | 1.5mm |
| Material | Post Hot-Dipped Galvanised (HDG) |
| Colour/Finish | Self Colour |
| Resistance Class | Class 4 |
| Standards | BS EN ISO 1461:2009 |
| Supplied With | 8x M10 Fastener Sets Per Coupler |
| Pack Quantity | Pairs |
| Important | HDG ladders are suitable for internal and external use, including light industrial and coastal environments. Ensure cut edges or drilled holes are treated with a suitable zinc-rich paint or similar to maintain corrosion protection. |
| Extra Information | adjust each coupler position to align the slots with the side rail slots and secure with all fasteners.Recommended Torque (M10): 40Nm., Slide the couplers under the return flanges of one ladder side rail and loosely fit a single fastener to each coupler to hold it in place. Slide the second ladder over both couplers |
